Click image to view full size image
Introduction:
1. Our this automatic charcoal briquette machine is very popular in dometic market and overseas market.
2. The automatic charcoal briquette machine adopts briquetting twice to press charcoal powder into briquettes, such as oval ball shape, round ball shape, pillow shape, egg shape and others which can meet your requirements.
3. The outlet briquettes are usually used for BBQ, cooking, keeping warm and others.
4. Except charcoal powder, our this charcoal briquette machine also can press coal powder, gypsum powder and other chemical powder into briquettes.
Our one customer visit our factory:
The pictures of outlet shapes briquettes:
1. Shape: The finished products pressed by automatic charcoal briquette machine are diversified, pillow shape, oval shape, egg shape, ball shape, column shape, square shape and so on. And the shapes and size of the briquettes can be customized.
2. Hardness: The finished product are very hard,they are not shattered even though down from 3 meters height.
3. Transport: It is very easy and convenient to transport either short transport or long transport.
Working principle of automatic charcoal briquette machine:
1. Through reducer simultaneously transmitted the power to two pressure rollers and made them rotated in opposite directions.
2. In two pressure rollers rotation, materials naturally enter into the ball molds on pressure roller and materials pressure vary from small to large with the rotation of the pressure roller.
3. When the material is rotated to two rollers line contact points, materials pressure has reached a peak.
4. Under enormous pressure, the powder materials are suppressed into finished ball.
Structure of automatic charcoal briquette machine:
The structure consists of three parts : the feed section ; transmission parts ; molding parts.
1. The feeding part: mainly to realize the quantitative feeding to ensure materials evenly entering between the rollers.
2. Transmission parts: main drive system is- the motor, triangle strip, reducer, open gear , roll.
3. Molding part: mainly refers to the host part, the core of which is the roll.
Features of automatic charcoal briquette machine:
1. The rollers of automatic charcoal briquette machine is made by hard materials with good wear resistance and long life time.
2. The service life of wearing parts is up to 4000 hours.
3. The machines electricity coal reduce by 60%.
4. The machine is easy to operate and maintain.
5. The molding materials are energy saving, easy to transport and higher utilization of waste.
6. The final products are smokeless, non-toxic, none peculiar and environmental protection.
7. The end outlet shape of products can be oval, round, square, ball egg-shaped and pillow shaped.
Pillow Or Cube Ball Charcoal Briquette Machine
